D-Link DWS-1008 User Manual
Displaying Forwarding Database Information
You can display the forwarding database size and the entries contained in the database.
Displaying the Size of the Forwarding Database
To display the number of entries contained in the forwarding database, use the following command:
show fdb count {perm | static | dynamic} [vlan
vlan-id
]
For example, to display the number of dynamic entries that the forwarding database contains, type the
following command:
DWS-1008#
show fdb count dynamic
Total Matching Entries = 2
Displaying Forwarding Database Entries
To display the entries in the forwarding database, use either of the following commands:
show fdb [
mac-addr-glob
[vlan
vlan-id
]]
show fdb {perm | static | dynamic | system | all} [port
port-list
| vlan
vlan-id
]
The
mac-addr-glob
parameter can be an individual address, or a portion of an address with the asterisk
(*) wildcard character representing from 1 to 5 bytes. The wildcard allows the parameter to indicate a
list of MAC addresses that match all the characters except the asterisk.
Use a colon between each byte in the address (for example,
11:22:33:aa:bb:cc or 11:22:33:*). You can
enter the asterisk (*) at the beginning or end of the address as a wildcard, on any byte boundary.
To display all entries in the forwarding database, type the following command:
DWS-1008#
show fdb all
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN Ports
TAG Dest MAC/Route Des
[CoS] Destination [Protocol Type]
----------------------------------------------------------------------------------------------------------------------------------
1
00:01:97:13:0b:1f
1
[ALL]
1
aa:bb:cc:dd:ee:ff *
3
[ALL]
1 Total 00:0b:0e:02:76:f5 Matching FDB Entries Displayed = 3
1
[ALL]
Summary of Contents for DWS-1008
Page 1: ......
