manualshive.com logo in svg

D-Link DWC-1000, User Manual

The D-Link DWC-1000 is a cutting-edge networking device, providing seamless connectivity and advanced features. Ensure a smooth experience with our comprehensive User Manual, available for free download on our website. Discover the product's full potential and optimize your network effortlessly with the assistance of our user-friendly manual.

Share
Download
background image

D-Link DWC-1000 User Manual

314

Section 8 - Viewing Status and Statistics

Path: Status > Wireless Information > Access Point > Hardware Capability

The wireless controller supports access points that have different hardware capabilities, such as number of 

radios, supported IEEE 802.11 modes, and software images. Using the AP Hardware Capability page, you view 

information about the radio hardware and IEEE modes supported by access points, as well as software images 

that are available for download to the access point. 

The right-click option will display the radio Information for the selected hardware type.

Field

Description

Hardware Type

Shows the ID number assigned to each access point hardware type. The 

wireless controller supports six different types of access point hardware.

Hardware Type Description

Describes the platform and the supported IEEE 802.11 modes.

Radio Count

Shows whether the hardware supports one radio or two radios.

Image Type

Shows the type of software the hardware requires.

Hardware Capability

Summary of Contents for DWC-1000







































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWC-1000

KEENZ Class Instruction Manual preview
Class
Brand: KEENZ Pages: 24
Eaton XN300 Manual preview
XN300
Brand: Eaton Pages: 288
FAAC XT4 433 RC User Manual preview
XT4 433 RC
Brand: FAAC Pages: 4
FAAC E391 Manual preview
E391
Brand: FAAC Pages: 52
Ziton ZP1-X3E Series Operation Manual preview
ZP1-X3E Series
Brand: Ziton Pages: 36
Harman FG2106-04 Quick Start Manual preview
FG2106-04
Brand: Harman Pages: 2
Linear Technology LT3507 Demo Manual preview
LT3507
Brand: Linear Technology Pages: 6
Nortek WRC4 Owner'S Manual preview
WRC4
Brand: Nortek Pages: 24
FMS 109753-KIM Manual preview
109753-KIM
Brand: FMS Pages: 108
Mandik SEDM-D Installation, Operation, Maintenance And Service Manual preview
SEDM-D
Brand: Mandik Pages: 34
ICP DAS USA I-8123W Quick Start User Manual preview
I-8123W
Brand: ICP DAS USA Pages: 8
MAASLAND FLEXESS DUO Manual preview
FLEXESS DUO
Brand: MAASLAND Pages: 10
VADDIO HOT-SHOT Installation And User Manual preview
HOT-SHOT
Brand: VADDIO Pages: 16
Watlow Ramping and Profiling Microprocessor-Based Control SERIES 1500 User Manual preview
Ramping and Profiling Microprocessor-Based Control SERIES 1500
Brand: Watlow Pages: 90
Rain Bird RC-4Bi Instruction Manual preview
RC-4Bi
Brand: Rain Bird Pages: 7
ENDA EDT1411 Quick Start Manual preview
EDT1411
Brand: ENDA Pages: 3
Danfoss MCD 600 Installation Manual preview
MCD 600
Brand: Danfoss Pages: 22
Mami HOG Quick Start Manual preview
HOG
Brand: Mami Pages: 2

Brands by name

Popular brands

Load more brands