D-Link DWC-1000 User Manual Download Page 290

Page: 290 / 390

D-Link DWC-1000 User Manual

290

Section 8 - Viewing Status and Statistics

Viewing USB Status

Path: Status > System Information > USB Status

The USB Status page summarizes the USB devices connected to the wireless controller. The wireless controller

allows to connect USB printer and USB disk (for firmware upgrade only) directly. There are two USB ports.

The D-Link Wireless Controller has a USB interface for printer access, and file sharing. There is no configuration on

the GUI to enable USB device support. Upon inserting your USB storage device, printer cable, the DWC Controller

will automatically detect the type of connected peripheral.

• USB Mass Storage:

Also referred to as a “share port”, files on a USB disk connected to the DWC can be

accessed by LAN users as a network drive.

• USB Printer:

The DWC can provide the LAN with access to printers connected through the USB. The printer

driver will have to be installed on the LAN host and traffic will be routed through the DSR between the LAN

and printer.

To configure printer on a Windows machine, follow the steps given below:

• Click ‘

Start

’ on the desktop.

• Select ‘

Printers and faxes

’ option.

• Right click and click ‘

add printer’

or click ‘

Add printer

’ present at the left menu.

• Select the ‘

Network Printer

’ radio button and click

Next

(select “Device isn’t listed in case of Windows7”).

• Select the ‘

Connect to printer using URL

’ radio button (‘

Select a shared printer by name

’ in case of

Windows 7) and give the following URL http://<Router’s LAN IP address>:631/printers/<Model Name>

(Model Name can be found in the USB status page of router’s GUI).

• Click ‘

next

’ and select the appropriate driver from the displayed list.

• Click on ‘

next

’ and ‘

finish

’ to complete adding the printer.

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands