D-Link DWC-1000 User Manual Download Page 280

Page: 280 / 390

D-Link DWC-1000 User Manual

280

Section 7 - VPN

Access Server Client

Field

Description

Mode

Select

Access Server Client

Port

Enter what port to use. The default port is 1194.

Enable Private Tun-

nel

Enable Private Tunnel. Applicable only in OpenVPN Access Server mode. This feature connects

to www.privatetunnel.com which provides a secured access connectivity. Reachability to www.

privatetunnel.com is required.

Upload Status

Displays if a configuration file has been uploaded.

File

Click

Browse

and locate the configuration file. Click

Open

and then click

Upload

Certificates

Select the set of certificates OpenVPN server uses. First row indicates the set of certificates and

keys that the server uses. Second row indicates the set of certificates and keys newly uploaded.

Enable Tls Authenti-

cation Key

Enabling this adds Tls authentication which adds an additional layer of authentication. This can

be checked only when the tls key is uploaded. By default, it is disabled.

Block Invalid Client

Certificates

Enabling this adds facility to block invalid client certificate. This feature requires crl certificate

which contains list of client certificates to be blocked. Please upload crl certificate in OpenVPN

Authentication page.

Save

Click

Save

to save and activate your settings.

To configure the switch as an OpenVPN access server client:

1. Click

VPN

OpenVPN

OpenVPN Settings

2. Toggle

OpenVPN

and complete the fields in the table below.

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands