D-Link DWC-1000 User Manual Download Page 380

Page: 380 / 390

D-Link DWC-1000 User Manual

380

Section 10 - Troubleshooting

System Logging

Path: Maintenance > Logs Settings > System Logs

The System Logs page lets you select the type of traffic passing through the wireless controller that you want to

log for display in Syslog, E-mailed logs, or the Event Viewer. This page helps in capturing the suspicious activity

such as denial-of-service attacks, general attack information, login attempts, dropped packets, and similar events.

Traffic can be tracked based on whether the packet was accepted or dropped by the firewall.

Routing Logs

All Unicast Traffic

If enabled, tracks packets directed to the wireless controller.

All Broadcast / Multicast Traffic

If enabled, tracks all broadcast or multicast packets directed to the wireless controller.

FTP Logs

If enabled, logged information is sent to FTP logs.

Redirected ICMP Packets

If enabled, tracks the number of redirected Internet Control Message Protocol (ICMP)

packets.

Invalid Packets

If enabled, tracks the number of invalid packets received.

Bandwidth Limit

If enabled, it tracks the number of packets exceeded the bandwidth range.

Remote Classification Server

Logs

By enabling this option, the logs related to WCF classification will be logged, this

option is available only when the WCF licence is enabled in device.

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands