D-Link DWC-1000 User Manual Download Page 225

Page: 225 / 390

D-Link DWC-1000 User Manual

225

Section 6 - Securing Your Network

Field

Description

LDAP Server Settings

Server Check

Checks status of configured servers, it checks whether servers are up or not.

LDAP Attribute 1-4

These are attributes related to LDAP users configured in LDAP server. These may

include attributes like SAM account name, Associated domain name etc. These can

be used to distinguish between different users having same user name.

LDAP Base DN

LDAP authentication requires the base domain name; contact your administrator for

the Base DN to use LDAP authentication for this domain.

Timeout

Set the amount of time in seconds, the controller should wait for a response from the

LDAP server.

Retries

This determines the number of tries the controller will make to the LDAP server

before giving up.

Administrator Account

Admin account in LDAP server that will be used when LDAP authentication is required

for PPTP/L2TP connection.

Password

Enter the admin password.

LDAP Server List

Name

Displays the names of the LDAP Servers.

IP Address

The IP address of the respective LDAP Server is also displayed.

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands