D-Link DWC-1000 User Manual Download Page 150

Page: 150 / 390

D-Link DWC-1000 User Manual

150

Section 5 - Advanced Network Configuration

IP/MAC Binding

Path: Network > LAN > IP/MAC Binding

Another available security measure is to only allow outbound traffic (from the LAN to option) when the LAN

node has an IP address matching the MAC address bound to it. This is IP/MAC Binding, and by enforcing the

gateway to validate the source traffic‘s IP address with the unique MAC Address of the configured LAN node,

you can ensure that the traffic from that the IP address is not spoofed. In the event of a violation (i.e., the traffic‘s

source IP address doesn‘t match up with the expected MAC address having the same IP address) the packets will

be dropped and can be logged for diagnosis.

1. Click

Network

LAN

IP/MAC Binding

2. Click

Add New IP/MAC Binding

to create a new entry.

3. Enter a name, MAC address, IP address and select whether to turn dropped packet logging on or off.

Click

Save

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands