D-Link DWC-1000 User Manual Download Page 308

Page: 308 / 390

D-Link DWC-1000 User Manual

308

Section 8 - Viewing Status and Statistics

Button

Description

AP Details

Shows detailed status information collected from the access point.

Radio Details

Shows detailed status for a radio interface.

Neighbor APs

Shows the neighbor APs that the specified AP has discovered through periodic

RF scans on the selected radio interface.

Neighbor Clients

Shows information about wireless clients associated with an access point or

detected by the access point radio.

VAP Details

Shows summary information about the virtual access points (VAPs) for the

selected access point and the access point radio interface that the wireless

controller manages.

Distributed Tunnel

Shows information about the L2 tunnels currently in use on the access point.

Reset AP

Reset the managed AP back to the factory default settings.

Disassociate Clients

View disassociate clients with the selected AP.

The Managed AP Statistics page shows information about traffic on the access point’s wired and wireless

interfaces. This information can help diagnose network issues, such as throughput problems. To view the

statistics for a managed access point, right-click on its entry in the Managed AP List and select

AP Statistics,

Radio Statistics, and VAP Statistics.

Button

Description

AP Statistics

Shows the number and type of packets transmitted and received on a specific

access point.

Radio Statistics

Shows per-radio information about the number and type of packets

transmitted and received for a specific access point.

VAP Statistics

Shows per-VAP information about the number of packets transmitted and

received and the number of wireless client failures for a specific access point.

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands