D-Link DWC-1000 User Manual Download Page 331

Page: 331 / 390

D-Link DWC-1000 User Manual

331

Section 8 - Viewing Status and Statistics

Path: Status > Wireless Information > WDS Groups Status > WDS Link Statistics

The WDS Group Link Statistics page displays summary information about the packets sent and received on the

WDS links.

Field

Description

The group number that identifies the configured WDS AP group.

Source AP MAC

The MAC address of one end-point of the WDS link.

Source Radio

The radio number of the WDS link endpoint on the source AP.

Destination AP MAC

The MAC address of the Source AP in the group.

Destination Radio

The radio number of the WDS link endpoint on the destination AP.

Source AP Packets/ Bytes Sent

Number of packets/bytes sent by the source AP.

Source AP Packets/Bytes Received

Number of packets/bytes received by the source AP.

Destination AP Packets/Bytes Sent

Number of packets/bytes sent by the destination AP.

Destination AP Packets/Bytes Received

Number of packets/bytes received by the destination AP.

Viewing WDS Link Statistics

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands