manualshive.com logo in svg

D-Link DWC-1000, User Manual

The D-Link DWC-1000 is a cutting-edge networking device, providing seamless connectivity and advanced features. Ensure a smooth experience with our comprehensive User Manual, available for free download on our website. Discover the product's full potential and optimize your network effortlessly with the assistance of our user-friendly manual.

Share
Download
background image

D-Link DWC-1000 User Manual

279

Section 7 - VPN

Field

Description

Enable Tls Authenti-

cation Key

Enabling this adds Tls authentication which adds an additional layer of authentication. This can 
be checked only when the tls key is uploaded. By default, it is disabled.

Block Invalid Client 

Certificates

Enabling this adds facility to block invalid client certificate. This feature requires crl certificate 
which contains list of client certificates to be blocked. Please upload crl certificate in OpenVPN 
Authentication page.

Allow only User 

Based Auth Configu-

ration

This method does not require the client certificate, client will authenticate using the username/
password only.

Enable User Based 

Auth

This option is introduced to provide the additional authentication method using username/
password.

Username

Enter the username.

Password

Enter the password.

Save

Click 

Save

 to save and activate your settings.

Summary of Contents for DWC-1000







































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWC-1000

Bartec MAK 3003 Manual preview
MAK 3003
Brand: Bartec Pages: 26
Baninni VIGO Manual preview
VIGO
Brand: Baninni Pages: 26
V2 CU1 Manual preview
CU1
Brand: V2 Pages: 48
baby joy TS10030 Quick Start Manual preview
TS10030
Brand: baby joy Pages: 11
TUYA WBR3L Datasheet preview
WBR3L
Brand: TUYA Pages: 28
Toptech MultiLoad II EXL Installation Manual preview
MultiLoad II EXL
Brand: Toptech Pages: 83
Winbond W77E516 Manual preview
W77E516
Brand: Winbond Pages: 85
Advantech ADAM-3017 Startup Manual preview
ADAM-3017
Brand: Advantech Pages: 2
Leviton Vizia RF+ VRP15-1LW Installation Instructions preview
Vizia RF+ VRP15-1LW
Brand: Leviton Pages: 3
Pfeiffer Vacuum PT G28 500 Installation Instructions Manual preview
PT G28 500
Brand: Pfeiffer Vacuum Pages: 100
Gecko MC-MP Service Manual preview
MC-MP
Brand: Gecko Pages: 82
L&L TLR04M-350-700 Installation Instructions Manual preview
TLR04M-350-700
Brand: L&L Pages: 16
ORTAL Heat Control System Installation And Operation Manual preview
Heat Control System
Brand: ORTAL Pages: 20
Nabco GYRO TECH Nabco Multi-Module Manual preview
GYRO TECH Nabco Multi-Module
Brand: Nabco Pages: 21
NDS SUNCONTROL2 User Manual preview
SUNCONTROL2
Brand: NDS Pages: 20
AMX NetLinx Integrated Controller NI-3100 Installation Manual preview
NetLinx Integrated Controller NI-3100
Brand: AMX Pages: 2
FAAC AT- 4/868 UHF Installation Manual preview
AT- 4/868 UHF
Brand: FAAC Pages: 25
Digi XBee 865 Getting Started Manual preview
XBee 865
Brand: Digi Pages: 19

Brands by name

Popular brands

Load more brands