D-Link DWC-1000 User Manual Download Page 348

Page: 348 / 390

D-Link DWC-1000 User Manual

348

Section 9 - Maintenance

SNMP

Path: Maintenance > Management > SNMP

SNMP is an additional management tool that is useful when multiple controllers in a network are being

managed by a central Master system. When an external SNMP manager is provided with this controller’s

Management Information Base (MIB) file, the manager can update the controller’s hierarchal variables to view

or update configuration parameters. The controller as a managed device has an SNMP agent that allows the

MIB configuration variables to be accessed by the Master (the SNMP manager). The Access Control List on the

controller identifies managers in the network that have read-only or read-write SNMP credentials. The Traps List

outlines the port over which notifications from this controller are provided to the SNMP community (managers)

and also the SNMP version (v1, v2c, v3) for the trap.

Configure SNMP v3 User List

1. Go to

Maintenance

Management

SNMP

page, and click

SNMP

tab.

2. Right-click either admin or guest and select

Edit

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands