D-Link DWC-1000 User Manual Download Page 172

Page: 172 / 390

D-Link DWC-1000 User Manual

172

Section 5 - Advanced Network Configuration

3. Complete the fields in the table below, and click

Save

. The fields vary with the type of the captive

portal.

Field

Description

VLAN ID

Enter a unique ID to this VLAN (2 - 4093).

Name

Enter a unique name for this VLAN. The name should allow you to easily identify this

VLAN from others you may add.

VLAN Type

Allows you to select the type of VLAN that you would like to create. If

VLAN (L3)

selected, VLAN will be associated with the L3 network. If

VLAN (without IP interface)

is selected, a VLAN is created in switch but none of the L3 network associated with it.

Activate InterVLAN Routing

Allows or denies communication between VLAN networks. Choices are:

• Enable = allows communications between different VLANs.

• Disable= denies communications between different VLANs.

Captive Portal Type

Select the type of captive portal from free, SLA, Permanent User, Temporary User, or

Billing User.

Authentication Server

Select the type of authentication server to authenticate captive portal for permanent,

temporary, or billing users. It shows the available authentication servers among which

one can be selected for this VLAN. All users login into the captive portal for this VLAN

, are authenticated through the selected server. This option appears only if Captive

Portal Type is selected as Permanent user. List of available authentication servers are:

1. Local User Database

2. Radius Server

3. LDAP Server

4. POP3

Authentication Type

This field is available only if Radius Server is selected as an Authentication Server.

Available authentication types are PAP/CHAP/MSCHAP/MSCHAPV2.

Login Profile Name

Select a captive portal from the drop-down menu. Click

Create a Profile

to create a

new profile.

IP Address

Enter an IP address for the Multi-VLAN subnet.

Subnet Mask

Enter the subnet mask for the Multi-VLAN subnet.

DHCP Mode

Select whether to enable DHCP Server or DHCP Relay.

LAN Proxy

Click to enable DNS proxy.

2. Click

Add New VLAN

. The following page will appear.

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands