manualshive.com logo in svg

D-Link DWC-1000, User Manual

The D-Link DWC-1000 is a cutting-edge networking device, providing seamless connectivity and advanced features. Ensure a smooth experience with our comprehensive User Manual, available for free download on our website. Discover the product's full potential and optimize your network effortlessly with the assistance of our user-friendly manual.

Share
Download
background image

D-Link DWC-1000 User Manual

123

Section 4 - Advanced WLAN Configuration

To configure a WDS managed group and its links, use the following general steps:

1.  Configure the satellite APs by connecting to the AP management interface while the AP is in stand‐alone 

mode. Set the WDS Managed Mode to Satellite AP and configure the WDS Group Password.

2.  From the controller CLI or web‐based interface, create a WDS group.
3.  Configure the WDS group password. The password you configure on the controller should be the same as 

the password you configure on each satellite AP.

4.  Add the MAC address of each AP to the WDS group.
5.  Configure the WDS links by specifying the MAC address and radio of the AP on each end of the link. 

Keep the following considerations in mind when you configure and manage a WDS group:

•   Make sure the radios that participate in the WDS link use the same channel. Use one of the following methods 

to control the channel:

–  When you configure the satellite AP in stand‐alone mode, use the Radio page to set a static channel.
–  When you configure the AP in the Valid AP database, specify the channel that the radio must use. By 

default, the channel is set to Auto.

–  On the Radio page for the AP profile, select only one channel in the list of Auto Eligible channels. By 

default, multiple channels are enabled.

•   D‐Link recommends that satellite APs do not have wired connectivity to the wireless controller.
•   A configuration push to WDS APs may take up to three minutes to complete.

Summary of Contents for DWC-1000







































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWC-1000

Danfoss VLT series Quick Manual preview
VLT series
Brand: Danfoss Pages: 37
Daikin MicroTech II Operation And Maintenance Manual preview
MicroTech II
Brand: Daikin Pages: 44
Lawler 61 Series Installation & Maintenance Manual preview
61 Series
Brand: Lawler Pages: 4
Hama 11412 Operating Instruction preview
11412
Brand: Hama Pages: 46
Galcon 61 Series Installation And Operating Instructions Manual preview
61 Series
Brand: Galcon Pages: 35
Parkside PDWE 8 A1 Instructions Manual preview
PDWE 8 A1
Brand: Parkside Pages: 86
Absima CR9T Quick Start preview
CR9T
Brand: Absima Pages: 5
SOMFY Situo 1 RTS Installation And Operating Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 112
Valco baby ZEE Product Reference Manual preview
ZEE
Brand: Valco baby Pages: 8
Inkel IRG-8116 Operation Manual preview
IRG-8116
Brand: Inkel Pages: 12
Webasto SmarTemp Control fx Installation And Operation Instructions Manual preview
SmarTemp Control fx
Brand: Webasto Pages: 8
Zencontrol zc-controller Instructions preview
zc-controller
Brand: Zencontrol Pages: 2
Daikin KBRCS01A Quick Start Manual preview
KBRCS01A
Brand: Daikin Pages: 2
Advantech PCI-1760U Startup Manual preview
PCI-1760U
Brand: Advantech Pages: 3
Phason SSC-1D Installation Manual preview
SSC-1D
Brand: Phason Pages: 8
JANE 5525 T77 Manual preview
5525 T77
Brand: JANE Pages: 76
Ultrahaptics STRATOSTM INSPIRE User Manual preview
STRATOSTM INSPIRE
Brand: Ultrahaptics Pages: 7
Vega VEGACAP 60 Series Operating Instructions Manual preview
VEGACAP 60 Series
Brand: Vega Pages: 12

Brands by name

Popular brands

Load more brands