D-Link DWC-1000 User Manual Download Page 384

Page: 384 / 390

D-Link DWC-1000 User Manual

384

Section 10 - Troubleshooting

All Logs

Current Logs

Path: Status > System Information > All Logs > Current Logs

The Display Logs window allows you to view configured log messages from the controller as they appear. Each

log will appear with a timestamp as determined by the controller's configured time. If remote logging such

as a Syslog server or e-mail logging is configured, the same logs are sent to the remote interface while being

displayed here. The logs are displayed based on the selection of facility, category, and severity levels.

• Click

Refresh

to refresh logs or reload page again.

• Click

Clear All

to remove all entries in the Display Logs screen.

• Click

Send Logs

to send all logs in the Display Logs screen to pre-configured e-mail recipients.

• Click

Export Logs

to export/save the current log entries to a file.

Field

Description

Facility Level

Filter the logs based on the facility level selected .

Category

Filter the logs based on category selected .

Severity Level

Filter the logs based on the severity level selected .

List of Current Logs

The List of Current Logs window allows you to view configured log messages from the router as they appear. Each log

appears with a timestamp as determined by the router’s configured time and based on the selection of facility, category,

severity levels combination. If remote logging such as a syslog server or e-mail logging is configured, the same logs are

sent to the remote interface while being displayed here .

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands