D-Link DWC-1000 User Manual Download Page 142

Page: 142 / 390

D-Link DWC-1000 User Manual

142

Section 5 - Advanced Network Configuration

Field

Description

DHCPv6

Status

Toggle On to enable DHCPv6. It is disable in default.

If DHCPv6 is Enabled (ON)

Mode

There are two ways to obtain an appropriate address for the gateway. You must select

one of the following:

•

Stateless Address Auto Configuration:

This option will use router advertisement

for address assignment. The IPv6 RADVD protocol will be enabled to advertise this

controller as a DHCPv6 client.

•

Stateful Address Auto Configuration:

Select this option to request an IPv6

address from any available DHCPv6 servers available on the ISP.

Domain Name

Name of the domain (Optional) for this DHCPv6 server.

Server Preference

This is used by the stateless DHCP to indicate the preference level of this DHCP server.

DHCPv6 clients will pick up the DHCPv6 server which has highest preference value. The

preference value must be a decimal integer and be between 0 and 255 (inclusive).

DNS Servers

Select one of the following options for DNS servers for the DHCPv6 clients

•

Use DNS Proxy:

On button to enable DNS proxy on this LAN, or Off this button to

disable this proxy. When this feature is enabled, the controller will act as a proxy for

all DNS requests and communicate with the ISP’s DNS servers (as configured in the

Option settings page)

•

Use DNS from ISP:

This option allows the ISP to define the DNS servers (primary/

secondary) for the LAN DHCP client

•

Use below:

if selected, the below configured Primary and Secondary DNS servers

are used for DHCPv6 clients.

Primary DNS Server

Enter the primary DNS server address.

Secondary DNS Server

Enter the secondary DNS server address.

Lease/Rebind Time

Duration (in seconds) for which IP addresses will be leased to clients.

Prefix Delegation

On/Off button for Enable/Disable Prefix Delegation.

Summary of Contents for DWC-1000







































































































































































































































































































































































































Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands

D-Link DWC-1000, User Manual

Search results

Summary of Contents for DWC-1000

Reviews:

Related manuals for DWC-1000

Brands by name

Popular brands