DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
194
srTCM – Single Rate Three Color Marker, marks packets green, yellow or red based on a rate
and two burst sizes. This is useful when only burst size matters.
•
CIR (Kbps) – Specifies the Committed Information Rate of the packet. The range is
0
to
1000000
.
•
CBS (Kbyte) – Specifies the Committed Burst Size of the packet. The unit is Kbyte. That
is to say, 1 means 1Kbyte. The maximum value is 16*1024. The range is
0
to
16384
.
•
EBS (Kbyte) – Specifies the Excess Burst Size of the packet. The unit is Kbyte. That is
to say, 1 means 1Kbyte. The maximum value is 16*1024. The range is
0
to
16384
.
Action
Conform – Specifies the action when the packet is in “green color” mode.
•
Replace DSCP – Allows you to change the dscp of the packet
•
Counter – Allows you to set the counter of the packet.
Exceed – Specifies the action when the packet is in “yellow color” mode.
•
Permit – Permits the packet.
•
Replace DSCP – Allows you to change the DSCP of the packet.
•
Counter – Allows you to set the counter of the packet.
•
Drop – Drops the packet.
Violate – Specifies the action when the packet is in “red color” mode.
•
Permit – Permits the packet.
•
Replace DSCP – Allows you to change the DSCP of the packet.
•
Counter – Allows you to set the counter of the packet.
•
Drop – Drops the packet.
Click
Apply
to implement changes made, click
<<Back
to return to the
ACL Flow Meter
window.
