DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
72
Forbidden
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
Click
Apply
to implement changes made.
802.1v Protocol VLAN
The 802.1v Protocol VLAN section includes 802.1v Protocol Group Settings and 802.1v Protocol VLAN Settings.
802.1v Protocol Group Settings
The table allows the user to create Protocol VLAN groups and add protocols to that group. The 802.1v Protocol VLAN
Group Settings supports multiple VLANs for each protocol and allows the user to configure the untagged ports of
different protocols on the same physical port. For example it allows the user to configure an 802.1Q and 802.1v
untagged port on the same physical port. The lower half of the table displays any previously created groups.
To view this window, click
L2 Features > VLAN > 802.1v Protocol VLAN > 802.1v Protocol Group Settings
as
shown below:
Figure 4- 10 802.1v Protocol Group Settings window
The following fields can be set:
Parameter Description
Group ID
Select an ID number for the group, between
1
and
16.
Group Name
This is used to identify the new Protocol VLAN group. Type an alphanumeric string of up to 32
characters.
Protocol
This function maps packets to protocol-defined VLANs by examining the type octet within the
packet header to discover the type of protocol associated with it. Use the drop-down menu to
toggle between
Ethernet_II, IEEE802.3_LLC
and
IEEE802.3_SNAP
.
Protocol Value
(0-FFFF)
Enter a value for the Group.
Click
Add
to make a new entry and
Delete All
to remove an entry.
802.1v Protocol VLAN Settings
The table allows the user to configure Protocol VLAN settings. The lower half of the table displays any previously
created settings.
To view this window, click
L2 Features > VLAN > 802.1v Protocol VLAN > 802.1v Protocol VLAN Settings
as
shown below: