DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
151
802.1p User Priority Settings
This window is used to map the 802.1p user priority of an incoming packet to one of the eight hardware queues
available on the Switch.
To view this window, click
QoS > 802.1p Settings > 802.1p User Priority
,
as shown below:
Figure 6- 3 802.1p User Priority Settings window
Once you have assigned a priority to the port groups on the Switch, you can then assign this Class to each of the
eight levels of 802.1p priorities. Click
Apply
to set your changes.
The following parameters can be set or are displayed:
Parameter Description
From Port/To
Port
A consecutive group of ports may be configured starting with the selected port.
Priority
The 802.1p user priority to associate with the
<class_id 0-7>
(the number of the hardware
queue) with.
Class ID
The number of the Switch’s hardware priority queue. The Switch has eight hardware priority
queues available. They are numbered between 0 (the lowest priority) and 7 (the highest priority).
Click
Apply
to set the changes.