DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
190
Switch, according to any additional rule added (see below).
Select
Deny
to specify the packets that match the access profile to be filtered.
Class
Enter an IPv6 Class. The class can be between
0
and
255
.
Flow Label
Configuring this field, in hex form, will instruct the Switch to examine the flow label field of the
IPv6 header. This flow label field is used by a source to label sequences of packets such as non-
default quality of service or real time service packets.
Time Range
Name
Tick the check box and enter the name of the Time Range settings that has been previously
configured in the
Time Range
Settings
window. This will set specific times when this access rule
will be implemented on the Switch.
Ports
Specifies the access rule can take effect on one port or a range of ports.
To view the settings of a previously correctly configured rule, click the corresponding
Show Details
button on the
CPU
Access Rule List
window
to view the following window:
Figure 7- 46 CPU Access Rule Detail Information window (IPv6)
To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for IP, open the
CPU
Access Profile List
window and click
Add/View Rules
for a
Packet Content entry. This will open the following window:
Figure 7- 47 CPU Access Rule List window (Packet Content)
To remove a previously created rule, click the corresponding
Delete Rules
button. To add a new Access Rule, click
the
Add Rule
button:
