DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
186
Type
mask. This will change the window according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IPv4 to instruct the Switch to examine the IPv4 address in each frame's header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header.
Select Packet Content Mask to specify a mask to check the content of the packet header.
Offset
This field will instruct the Switch to mask the packet header beginning with the offset value
specified:
0-15
– Enter a value in hex form to mask the packet from the beginning of the packet to the 15th
byte.
16-31
– Enter a value in hex form to mask the packet from byte 16 to byte 31.
32-47
– Enter a value in hex form to mask the packet from byte 32 to byte 47.
48-63
– Enter a value in hex form to mask the packet from byte 48 to byte 63.
64-79
– Enter a value in hex form to mask the packet from byte 64 to byte 79.
Click
Create
to set this entry in the Switch’s memory.
To view the settings of a previously correctly created profile, click the corresponding
Show Details
button on the
CPU
Access Profile List
window. The following window opens:
Figure 7- 37 CPU Access Profile Detail Information window (Packet Content)
To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for Ethernet, open the
CPU
Access Profile List
window and click
Add/View Rules
for
an Ethernet entry. This will open the following window:
Figure 7- 38 CPU Access Rule List window (Ethernet)
To remove a previously created rule, click the corresponding
Delete Rules
button. To add a new Access Rule, click
the
Add Rule
button:
