manualshive.com logo in svg

D-Link DGS-3700-12, User Manual

The D-Link DGS-3700-12 is a high-performance Ethernet switch designed for small to medium-sized businesses. Ensure a seamless hardware installation with the comprehensive Hardware Installation Manual available for free download from our website. This user-friendly manual provides detailed instructions and diagrams to assist you in effortlessly setting up your network.

Share
Download
background image

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual 

 

 

 

123 

 

Figure 4- 77 IPv6 Multicast Profile Settings window 

The following fields can be set: 

Parameter                 Description 

 

Profile ID (1-60) 

Use the drop-down menu to choose a Profile ID. 

Profile Name 

Enter a name for the IPv6 Multicast Profile. 

To edit an entry click the corresponding 

Edit

 button and to delete an entry, click the corresponding 

Delete

 button.  

 

Figure 4- 78 IPv6 Multicast Profile Settings (Edit) window

 

To configure the Group List Settings click the hyperlinked 

Group List

. 

 

Figure 4- 79 Multicast Address Group List Settings window 

Enter the multicast Address List starting with the lowest in the range, and click 

Add

. To return to the IPv6 Multicast 

Profile Settings window, click the 

<<Back

 button. 

IPv6 Limited Multicast Range Settings 

This window enables the user to configure the ports or VLANs on the switch that will be involved in the Limited IPv6 
Multicast Range. The user can configure the range of IPv6 multicast addresses that will be accepted on the ports or 
VLANs.  

To view this window, click 

L2 Features > Multicast Filtering > IPv6 Multicast Filtering > IPv6 Limited Multicast 

Range Settings

,

 

as shown below:

 

Summary of Contents for DGS-3700-12













































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3700-12

T&D RTR-50 User Manual preview
RTR-50
Brand: T&D Pages: 122
XAVI Technologies Corp. 7721r User Manual preview
7721r
Brand: XAVI Technologies Corp. Pages: 71
MiLAN E-MCC-1600 Install Manual preview
E-MCC-1600
Brand: MiLAN Pages: 1
Symantec PacketShaper PS-S200 Quick Start Manual preview
PacketShaper PS-S200
Brand: Symantec Pages: 2
Mastervolt MasterBus Tanklevel Interface User And Installation Manual preview
MasterBus Tanklevel Interface
Brand: Mastervolt Pages: 8
TRENDnet TEG-S51SFP Quick Installation Manual preview
TEG-S51SFP
Brand: TRENDnet Pages: 10
Infoblox Trinzic 100 Installation Manual preview
Trinzic 100
Brand: Infoblox Pages: 13
Lanner NCA-1040 User Manual preview
NCA-1040
Brand: Lanner Pages: 59
Ubiquiti EdgeSwtch 5XP Quick Start Manual preview
EdgeSwtch 5XP
Brand: Ubiquiti Pages: 13
TP-Link VIGI NVR1004H-4P Quick Installation Manual preview
VIGI NVR1004H-4P
Brand: TP-Link Pages: 2
Chase Research IOLINK-130 Installation & Application Manual preview
IOLINK-130
Brand: Chase Research Pages: 114
Aviosys 9255W User Manual preview
9255W
Brand: Aviosys Pages: 77
RR-Concepts StationMaster Manual preview
StationMaster
Brand: RR-Concepts Pages: 12
ALIBI ALI-NVR71128R User Manual preview
ALI-NVR71128R
Brand: ALIBI Pages: 232
Transition Networks N-FXE-xxx-01 User Manual preview
N-FXE-xxx-01
Brand: Transition Networks Pages: 5
Trend Micro R610 Series Quick Start Manual preview
R610 Series
Brand: Trend Micro Pages: 2
Allied Telesis AR100 series User Manual preview
AR100 series
Brand: Allied Telesis Pages: 128
National Instruments NI 653x User Manual preview
NI 653x
Brand: National Instruments Pages: 147

Brands by name

Popular brands

Load more brands