DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
139
LLDP Remote Port Information
This window displays port information learned from the neighbor. The switch receives packets from a remote station
and is able to store the information as local.
To view this window, click
L2 Features > LLDP > LLDP > LLDP Remote Port Information
,
as shown below:
Figure 4- 102 LLDP Remote Port Information window
Select the port to view by using the drop-down menu and then click
Find
. The information will be displayed in the
lower half of the table. To view the settings for an individual port, select the port and then click
Show Normal
, which
will display the following window:
Figure 4- 103 LLDP Remote Port Information (Show Normal) window
LLDP-MED
LLDP-MED System Settings
On this window the user can configure the fast start repeat count.
To view this window, click
L2 Features > LLDP > LLDP-MED > LLDP-MED System Settings
,
as shown below:
Figure 4- 104 LLDP-MED System Settings window
The following parameters can be set:
Parameter Description
LLDP-MED Log
State
Enable or disable the LLDP-MED Log State.
Fast Start Repeat
Count
The repeat count range is from
1
to
10
. When an LLDP-MED Capabilities TLV is detected for
an MSAP identifier not associated with an existing LLDP remote system MIB, the application
layer shall start the fast start mechanism. The default value is
4
.
Click
Apply
to implement changes made.
