manualshive.com logo in svg

D-Link DGS-3700-12, User Manual

The D-Link DGS-3700-12 is a high-performance Ethernet switch designed for small to medium-sized businesses. Ensure a seamless hardware installation with the comprehensive Hardware Installation Manual available for free download from our website. This user-friendly manual provides detailed instructions and diagrams to assist you in effortlessly setting up your network.

Share
Download
background image

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual 

 

 

 

216 

Password 

Enter the password for the RADIUS server which is to be used for packets being sent 
requesting authentication. The default password is “default”. 

RADIUS Authorization 

Toggle 

Enabled

  and 

Disabled

. The user can enable or disable this option to enable 

RADIUS Authorization or not.  This function only takes  effect when authentication is 
done by RADIUS. 

Local Authorization 

Toggle 

Enabled

  and 

Disabled

. The user can enable or disable this option to enable 

Local Authorization or not. This function only takes effect when authentication is done 
by local database. 

Max User (1-1000) 

Set the maximum number of users, between 

1

 and a 

1000

. Alternatively, tick the No 

Limit check box. 

Guest VLAN Settings 

VLAN Name/  
VID (1-4094) 

Click the radio button to configure the Guest VLAN Name or Guest VLAN ID. Enter 
the name of the previously configured Guest VLAN being used for this function. 

Member Ports (e.g.: 1, 5-9) 

Enter the list of ports to be member of the Guest VLAN. 

Port Settings 

From Port /To Port 

Enter the Port range. 

State 

Use the pull-down menu to enable or disable the MAC-based Access Control function 
on individual ports. 

Mode 

Select 

Port-based

 or 

Host-based

 mode.  

Aging Time (1-1440) 

The time period during which an authenticated host will be kept in an authenticated 
state. When the aging time is timed out, the host will be moved back to an 
unauthenticated state. The range is between 

1

  and 

1440

  minutes. The default is 

1440

. Alternatively, tick the Infinite check box. 

Block Time (1-300) 

If a host fails to pass authentication, the next authentication will not start within the 
block  time unless the user clears the entry state manually. The default is 

300 

seconds. Alternatively, tick the Infinite check box.  

Max User (1-1000) 

Set the maximum number of users,  between 

1

  and a 

1000

. The default is 

128

. 

Alternatively, tick the No Limit check box. 

Click 

Apply

 to implement changes. 

MAC-based Access Control Local Settings 

The following window is used to set a list of MAC addresses, along with their corresponding target VLAN, which will be 
authenticated for the Switch. Once a queried MAC address is matched in this table, it will be placed in the VLAN 
associated with it here. The switch administrator may enter up to 128 MAC addresses to be authenticated using the 
local method configured here.  

To view this window, click 

Security > MAC-based Access Control > MAC-based Access Control Local Settings 

as shown below: 

Summary of Contents for DGS-3700-12













































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3700-12

Ubiquiti M900 Quick Start Manual preview
M900
Brand: Ubiquiti Pages: 24
ICP DAS USA I-7532M-FD User Manual preview
I-7532M-FD
Brand: ICP DAS USA Pages: 48
ICP DAS USA WF-2572 User Manual preview
WF-2572
Brand: ICP DAS USA Pages: 24
ICP DAS USA MSM-508 Quick Start preview
MSM-508
Brand: ICP DAS USA Pages: 4
MikroTik RouterBOARD SXT 5HnD Quick Setup Manual And Warranty Information preview
RouterBOARD SXT 5HnD
Brand: MikroTik Pages: 2
MikroTik RouterBOARD Groove Quick Setup Manual And Warranty Information preview
RouterBOARD Groove
Brand: MikroTik Pages: 4
FOR-A USF-105AS Operation Manual preview
USF-105AS
Brand: FOR-A Pages: 39
U.S. Products maxg Quick Installation Manual preview
maxg
Brand: U.S. Products Pages: 80
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Brand: National Instruments Pages: 36
pivotal COMMWARE ECHO 5G How To Set Up preview
COMMWARE ECHO 5G
Brand: pivotal Pages: 2
HPE FlexNetwork 5130 Series Troubleshooting Manual preview
FlexNetwork 5130 Series
Brand: HPE Pages: 33
ZyXEL Communications PK5000Z How To Configure preview
PK5000Z
Brand: ZyXEL Communications Pages: 3
ZyXEL Communications Comet 3356P-LAN User Manual preview
Comet 3356P-LAN
Brand: ZyXEL Communications Pages: 38
TP-Link Archer MR600 User Manual preview
Archer MR600
Brand: TP-Link Pages: 113
VIA Technologies Mobile360 M810 Quick Start Manual preview
Mobile360 M810
Brand: VIA Technologies Pages: 25
H3C AR 46-80 Installation Manual preview
AR 46-80
Brand: H3C Pages: 103
Patton electronics IpLink 2884 Quick Start Manual preview
IpLink 2884
Brand: Patton electronics Pages: 8
N-Tron 104TX Specification Sheet preview
104TX
Brand: N-Tron Pages: 2

Brands by name

Popular brands

Load more brands