DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
188
To configure the Access Rules for IP, open the
CPU
Access Profile List
window and click
Add/View Rules
for an IP
entry. This will open the following window.
Figure 7- 41 CPU Access Rule List window (IPv4)
To remove a previously created rule, click the corresponding
Delete Rules
button. To add a new Access Rule, click
the
Add Rule
button:
Figure 7- 42 Add CPU Access Rule window (IPv4)
To set the Access Rule for IPv4, adjust the following parameters and click
Apply
Parameter Description
Access ID (1-100)
Type in a unique identifier number for this access. This value can be set from
1
to
100
.
Action
Select
Permit
to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select
Deny
to specify the packets that match the access profile to be filtered.
DSCP
Selecting this option instructs the Switch to examine the DiffServ Code part of each packet
header. Enter a value between
0
and
63
.
Time Range
Name
Tick the check box and enter the name of the Time Range settings that has been previously
configured in the
Time Range
Settings
window. This will set specific times when this access rule
will be implemented on the Switch.
Ports
Specifies the access rule can take effect on one port or a range of ports.
To view the settings of a previously correctly configured rule, click the corresponding
Show Details
button on the
CPU
Access Rule List
window. The following window opens:
