DGS-3024 Layer 2 Switch CLI Reference Manual
show mac_notification ports
Purpose
Used to display the Switch’s MAC address table notification status
settings.
Syntax
show mac_notification ports <portlist>
Description
This command is used to display the Switch’s MAC address table
notification status settings.
Parameters
<portlist>
- Specify a port or group of ports to be viewed.
Entering this command without the parameter will display the MAC
notification table for all ports.
Restrictions None
Example usage:
To display all port’s MAC address table notification status settings:
DGS-3024:4#show mac_notification ports
Command: show mac_notification ports
Port # MAC Address Table Notification State
------ ------------------------------------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
11 Disabled
12 Disabled
13 Disabled
14 Disabled
15 Disabled
16 Disabled
17 Disabled
18 Disabled
19 Disabled
20 Disabled
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
50
