DGS-3024 Layer 2 Switch CLI Reference Manual
enable 802.1x
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable 802.1x switch wide:
DGS-3024:4#enable 802.1x
Command: enable 802.1x
Success.
DGS-3024:4#
disable 802.1x
Purpose
Used to disable the 802.1x server on the Switch.
Syntax
disable 802.1x
Description
The
disable 802.1x
command is used to disable the 802.1x Port-based
Network Access control server application on the Switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To disable 802.1x on the Switch:
DGS-3024:4#disable 802.1x
Command: disable 802.1x
Success.
DGS-3024:4#
show 802.1x
auth_state
Purpose
Used to display the current authentication state of the 802.1x server on the
Switch.
Syntax
show 802.1x auth_state {ports <portlist>}
Description
The
show 802.1x command
is used to display the current 802.1x
authentication state of the specified ports of the Port-based Network Access
Control server application on the Switch.
The following details what is displayed:
Port number
−
Shows the physical port number on the Switch.
Auth PAE State: Initialize / Disconnected / Connecting / Authenticating /
109
