DGS-3024 Layer 2 Switch CLI Reference Manual
show 802.1x
auth_state
Authenticated / Held / ForceAuth / ForceUnauth
−
Shows the current state of
the Authenticator PAE.
Backend State: Request / Response / Fail / Idle / Initialize / Success /
Timeout
−
Shows the current state of the Backend Authenticator.
Port Status: Authorized / Unauthorized
−
Shows the result of the
authentication process. Authorized means that the user was authenticated,
and can access the network. Unauthorized means that the user was not
authenticated, and cannot access the network.
Parameters
ports <portlist>
−
Specifies a port or range of ports to be viewed.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To display the 802.1x authentication states (stacking disabled) for Port-based 802.1x:
DGS-3024:4#show 802.1x auth_state ports 1-5
Command: show 802.1x auth_state ports 1-5
Port Auth PAE State Backend State Port Status
------ -------------- ------------- ------------
1 ForceAuth Success Authorized
2 ForceAuth Success Authorized
3 ForceAuth Success Authorized
4 ForceAuth Success Authorized
5 ForceAuth Success Authorized
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
show 802.1x
auth_configuration
Purpose
Used to display the current configuration of the 802.1x server on the Switch.
Syntax
show 802.1x auth_configuration {ports <portlist>}
Description
The show 802.1x command is used to display the current configuration of
the 802.1x Port-based Network Access Control server application on the
Switch.
The following details what is displayed:
802.1x Enabled/Disabled
−
Shows the current status of 802.1x functions on
the Switch.
Authentication Protocol: Radius_Eap
−
Shows the authentication protocol
suite in use between the Switch and a RADIUS server.
Port number
−
Shows the physical port number on the Switch.
Capability: Authenticator/None
−
Shows the capability of 802.1x functions
on the port number displayed above. There are four 802.1x capabilities that
can be set on the Switch: Authenticator, Supplicant, Authenticator and
Supplicant, and None.
Port Status: Authorized/Unauthorized
−
Shows the result of the
110
