DGS-3024 Layer 2 Switch CLI Reference Manual
{braces}
Purpose
Encloses an optional value or set of optional arguments.
Syntax
reset {[config | system]}
Description
In the above syntax example, you have the option to specify
config
or
system
. It is not necessary to specify either optional value, however the
effect of the system reset is dependent on which, if any, value is specified.
Therefore, with this example there are three possible outcomes of
performing a system reset. See the chapter
Basic Commands
for more
details about the reset command.
Example
command
reset config
Line Editing Key Usage
Delete
Deletes the character under the cursor and then shifts the remaining
characters in the line to the left.
Backspace
Deletes the character to the left of the cursor and shifts the remaining
characters in the line to the left.
Left Arrow
Moves the cursor to the left.
Right Arrow
Moves the cursor to the right.
Up Arrow
Repeat the previously entered command. Each time the up arrow is
pressed, the command previous to that displayed appears. This way it is
possible to review the command history for the current session. Use the
down arrow to progress sequentially forward through the command history
list.
Down Arrow
The down arrow will display the next command in the command history
entered in the current session. This displays each command sequentially as
it was entered. Use the up arrow to review previous commands.
Tab
Shifts the cursor to the next field to the left.
Multiple Page Display Control Keys
Space
Displays the next page.
CTRL+c
Stops the display of remaining pages when multiple pages are to be
displayed.
ESC
Stops the display of remaining pages when multiple pages are to be
displayed.
n
Displays the next page.
p
Displays the previous page.
q
Stops the display of remaining pages when multiple pages are to be
displayed.
r
Refreshes the pages currently displayed.
a
Displays the remaining pages without pausing between pages.
Enter
Displays the next line or table entry.
10
