DGS-3024 Layer 2 Switch CLI Reference Manual
config serial_port
5_minutes
−
The console will log out the current user if there is no
user input for 5 minutes.
10_minutes
−
The console will log out the current user if there is
no user input for 10 minutes.
15_minutes
−
The console will log out the current user if there is
no user input for 15 minutes.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the baud rate:
DGS-3024:4#config serial_port baud_rate 9600
Command: config serial_port baud_rate 9600
Success.
DGS-3024:4#
enable clipaging
Purpose
Used to pause the scrolling of the console screen when the show
command displays more than one page.
Syntax
enable clipaging
Description
This command is used when issuing a command which causes the
console screen to rapidly scroll through several pages. This
command will cause the console to pause at the end of each page.
The default setting is enabled.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
DGS-3024:4#enable clipaging
Command: enable clipaging
Success.
DGS-3024:4#
16
