DGS-3024 Layer 2 Switch CLI Reference Manual
login
Purpose
Used to log in a user to the Switch’s console.
Syntax
login
Description
This command is used to initiate the login procedure. The user will be
prompted for his Username and Password.
Parameters None.
Restrictions None.
Example usage:
To initiate the login procedure:
DGS-3024:4#login
Command: login
UserName:
logout
Purpose
Used to log out a user from the Switch’s console.
Syntax
logout
Description
This command terminates the current user’s session on the Switch’s
console.
Parameters None.
Restrictions None.
Example usage:
To terminate the current user’s console session:
DGS-3024:4#logout
ping
Purpose
Used to test the connectivity between network devices.
Syntax
ping <ipaddr> {times <value 1-255>} {timeout <sec 1-99>}
Description
The ping command sends Internet Control Message Protocol
(ICMP) echo messages to a remote IP address. The remote IP
address will then “echo” or return the message. This is used to
confirm connectivity between the Switch and the remote device.
Parameters
<ipaddr>
- Specifies the IP address of the host.
times <value 1-255>
- The number of individual ICMP echo
messages to be sent. The maximum value is 255. The default is
0.
timeout <sec 1-99>
- Defines the time-out period while waiting for
a response from the remote device. A value of 1 to 99 seconds
can be specified. The default is 1 second.
21
