DGS-3024 Layer 2 Switch CLI Reference Manual
config 802.1x auth_parameter ports
settings.
Parameters
<portlist>
−
Specifies a port or range of ports to be configured.
all
−
Specifies all of the ports on the Switch.
default
−
Returns all of the ports in the specified range to their 802.1x
default settings.
direction [both | in]
−
Determines whether a controlled port blocks
communication in both the receiving and transmitting directions, or just the
receiving direction.
port_control
−
Configures the administrative control over the authentication
process for the range of ports.
force_auth
−
Forces the Authenticator for the port to become
authorized. Network access is allowed.
auto
−
Allows the port’s status to reflect the outcome of the
authentication process.
force_unauth
−
Forces the Authenticator for the port to become
unauthorized. Network access will be blocked.
quiet_period <sec 0-65535>
−
Configures the time interval between
authentication failure and the start of a new authentication attempt.
tx_period <sec 1-65535>
- Configures the time to wait for a response from a
supplicant (user) to send EAP Request/Identity packets.
supp_timeout <sec 1-65535>
- Configures the time to wait for a response
from a supplicant (user) for all EAP packets, except for the Request/Identity
packets.
server_timeout <sec 1-65535>
- Configure the length of time to wait for a
response from a RADIUS server.
max_req <value 1-10>
−
Configures the number of times to retry sending
packets to a supplicant (user).
reauth_period <sec 1-65535>
−
Configures the time interval between
successive re-authentications.
enable_reauth [enable | disable]
−
Determines whether or not the Switch
will re-authenticate. Enabled causes re-authentication of users at the time
interval specified in the Re-authentication Period field, above.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure 802.1x authentication parameters for ports 1 – 20:
DGS-3024:4#config 802.1x auth_parameter ports 1 – 20 direction both
Command: config 802.1x auth_parameter ports 1 – 20 direction both
Success.
DGS-3024:4#
113
