DGS-3024 Layer 2 Switch CLI Reference Manual
OpenCrlDir : Both
Port Control : Auto
QuietPeriod : 60 sec
TxPeriod : 30 sec
SuppTimeout : 30 sec
ServerTimeout : 30 sec
MaxReq : 2 times
ReAuthPeriod : 3600 sec
ReAuthenticate : Disabled
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
config 802.1x capability ports
Purpose
Used to configure the 802.1x capability of a range of ports on the Switch.
Syntax
config 802.1x capability ports [<portlist> | all] [authenticator | none]
Description
The
config 802.1x
command has four capabilities that can be set for each
port. Authenticator, Supplicant, Authenticator and Supplicant, and None.
Parameters
<portlist>
−
Specifies a port or range of ports to be configured.
all
−
Specifies all of the ports on the Switch.
authenticator
−
A user must pass the authentication process to gain access
to the network.
none
−
The port is not controlled by the 802.1x functions.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure 802.1x capability on ports 1-10:
DGS-3024:4#config 802.1x capability ports 1–10 authenticator
Command: config 802.1x capability ports 1–10 authenticator
Success.
DGS-3024:4#
config 802.1x auth_parameter ports
Purpose
Used to configure the 802.1x Authentication parameters on a range of
ports. The default parameter will return all ports in the specified range to
their default 802.1x settings.
Syntax
config 802.1x auth_parameter ports [<portlist> | all] [default |
{direction [both | in] | port_control [force_unauth | auto | force_auth] |
quiet_period <sec 0-65535> | tx_period <sec 1-65535> | supp_timeout
<sec 1-65535> | server_timeout <sec 1-65535> | max_req <value 1-10>
| reauth_period <sec 1-65535> | enable_reauth [enable | disable]}]
Description
The
config 802.1x auth_parameter
command is used to configure the
802.1x Authentication parameters on a range of ports. The default
parameter will return all ports in the specified range to their default 802.1x
112
