DGS-3024 Layer 2 Switch CLI Reference Manual
config dst
adjustment effects system time for both manually configured time and time
set using SNTP service.
Parameters
disable
- Disable the DST seasonal time adjustment for the Switch.
repeating
- Using repeating mode will enable DST seasonal time
adjustment. Repeating mode requires that the DST beginning and ending
date be specified using a formula. For example, specify to begin DST on
Saturday during the second week of April and end DST on Sunday during
the last week of October.
annual
- Using annual mode will enable DST seasonal time adjustment.
Annual mode requires that the DST beginning and ending date be specified
concisely. For example, specify to begin DST on April 3 and end DST on
October 14.
s_week
- Configure the week of the month in which DST begins.
•
•
•
•
•
•
•
•
•
•
<start_week 1-4,last>
- The number of the week during the month
in which DST begins where 1 is the first week, 2 is the second
week and so on, last is the last week of the month.
e_week
- Configure the week of the month in which DST ends.
<end_week 1-4,last>
- The number of the week during the month
in which DST ends where 1 is the first week, 2 is the second week
and so on, last is the last week of the month.
s_day
– Configure the day of the week in which DST begins.
<start_day sun-sat>
- The day of the week in which DST begins
expressed using a three character abbreviation (sun, mon, tue,
wed, thu, fri, sat)
e_day
- Configure the day of the week in which DST ends.
<end_day sun-sat>
- The day of the week in which DST ends
expressed using a three character abbreviation (sun, mon, tue,
wed, thu, fri, sat)
s_mth
- Configure the month in which DST begins.
<start_mth 1-12>
- The month to begin DST expressed as a
number.
e_mth
- Configure the month in which DST ends.
<end_mth 1-12>
- The month to end DST expressed as a
number.
s_time
– Configure the time of day to begin DST.
<start_time hh:mm>
- Time is expressed using a 24-hour clock, in
hours and minutes.
e_time
- Configure the time of day to end DST.
<end_time hh:mm>
- Time is expressed using a 24-hour clock, in
hours and minutes.
s_date
- Configure the specific date (day of the month) to begin DST.
<start_date 1-31>
- The start date is expressed numerically.
e_date
- Configure the specific date (day of the month) to begin DST.
<end_date 1-31>
- The end date is expressed numerically.
offset [30 | 60 | 90 | 120]
- Indicates number of minutes to add or to subtract
124
