Document Number: 002-10635 Rev. *I
Page
280 of 325
S6J3310/20/30/40 Series
Page
Section
Change Results
Rev. *B
13
3.Product
Description
3.2.Product
description
Revised the below:
Error)
(None)
12bit resolution, 2 unit
48 channels of analog input for TEQFP208
48 channels of analog input for TEQFP176
35 channel of analog input for TEQFP144
24 channels of them are shared with the SMC for TEQFP208/176/144
External trigger and timer trigger are available.
The description of the A/D converter function should be referred in the S6J3300 hardware manual. Though the
chapter of I/O port in Traveo
TM
Platform hardware manual describes another A/D converter function, do not refer it.
Correct)
12bit resolution, 2 unit(Unit0 is possible to select channels 4-31. Unit1 is possible to select channels 32-63.)
48 channels of analog input for TEQFP208
48 channels of analog input for TEQFP176
35 channel of analog input for TEQFP144
24 channels of them are shared with the SMC for TEQFP208/176/144
External trigger and timer trigger are available.
The description of the A/D converter function should be referred in the S6J3300 hardware manual. Though the
chapter of I/O port in Traveo
TM
Platform hardware manual describes another A/D converter function, do not refer it.
A/D Channel Control Register (ADC12Bn_CHCTRL0)[bit5:0] ANIN[5:0] : Analog Input Selection bits.
This register setting is possible of channel 0-31 (the register value is 00_0000 to 01_1111).
15
3.Product
Description
3.2.Product
description
Revised as below:
Correct)
Power Supply
Control
(PSC)
PSC (PSC_1) output is used for external 1.2V power supply module control and automatically switched with the following
condition.
"High": Request to supply VCC12
- "Power ON Reset" is released
- CPU wakes up from PSS shutdown mode
"Low": Request to stop supplying VCC12
- CPU transfers from RUN mode to PSS shutdown mode.
For timing chart of output signals include PSC in detail, see the "S6J3300 hardware manual" and chapter "State Transition"
22
23
4.Package and
Pin Assignment
4.2.Package
Dimensions
Revised as below:
4.2.3.TEQFP144
Error)
Figure 4 6: TEQFP144
Figure 4 7: TEQFP144
The package dimension of TEQFP144 (0.4mm Pitch) is the provisional version.
Correct)
Figure 4 6: TEQFP144 (0.5mm Pitch)
Figure 4 7: TEQFP144 (0.4mm Pitch)
The package dimension of TEQFP144 (0.4mm Pitch) is the formal version.
31
32
6.Port
Description
6.1 Port
Description list
Revised the below:
Error)
ADC Analog [4 to18, 21, 24 to 26, 28 to 32, 39 to 47, 49 to 63] input pin
Correct)
ADC Unit0 [ch.4 to ch.18, ch.21, ch.24 to ch.26, ch.28 to ch.31] input pin
ADC Unit1 [ch.32, ch.39 to ch.47, ch.49 to ch.63] input pin
