Cypress S6J331EJSESE20000, Manual

Page: 164 / 326

Document Number: 002-10635 Rev. *I Page
164 of 325
S6J3310/20/30/40 Series
Parameter Symbol
Rating
Unit Remarks
Min Max
"L"-level total output current *5
ΣI
OL3
- 50 mA
*8
ΣI
OL4
- 50 mA
*9, *11
"H"-level maximum output
current
*3
I
OH1
- -3.5 mA When setting is 1 mA *6, *7, *8
I
OH2
- -7 mA When setting is 2 mA
*6, *7, *8, *9
I
OH3
- -10 mA When setting is 5 mA
*9
I
OH4
- -16 mA When setting is 10 mA *9
I
OH6
- -40 mA When setting is 30 mA
*7
I
OH8
- -11 mA When setting is 6 mA *11
I
OH9
- -21 mA When setting is 15 mA
*12
"H"-level average output
current
*4
I
OHAV1
- -1 mA When setting is 1 mA
*6, *7, *8
I
OHAV2
- -2 mA When setting is 2 mA *6, *7, *8, *9
I
OHAV3
- -5 mA When setting is 5 mA *9
I
OHAV4
- -10 mA When setting is 10 mA
*9
I
OHAV6
- -30 mA When setting is 30 mA *7
I
OHAV8
- -6 mA When setting is 6 mA *11
I
OHAV9
- -15 mA When setting is 15 mA *12
"H"-level total output current *5
ΣI
OH1
- -50 mA *6, *10
ΣI
OH2
- -250 mA
*7
ΣI
OH3
- -50 mA *8
ΣI
OH4
- -50 mA *9 *11
Power consumption P
D
- 2000 mW -40 o C ≤ T
A
≤ 105 o C
- 1100 mW -40 o C ≤ T
A
≤ 125 o C
Operating temperature T
A
-40 +105
o
C P
D
≤ 2000 mW
-40 +125 o C P
D
≤ 1100 mW
System Thermal Resistance
Theta j-a1 - 17 o C/W
TEQFP
208
The minimum value
depends on the system
specification of heat
radiation. The described
value is estimated under
the condition which is
specified at “
9.1.2
Recommended
Operating
”.
Theta j-a2 - 19 o C/W
TEQFP
176
Theta j-a3 - 20 o C/W
TEQFP
144
(0.5 mm
Pitch)
Theta j-a4 - 22 o C/W
TEQFP
144
(0.4 mm
Pitch)
Package Thermal Resistance
Psi j-t1 - 0.6
o
C/W TEQFP208
Psi j-t2 - 1.0 o C/W TEQFP176
Psi j-t3 - 2.0 o C/W TEQFP144 (0.5 mm Pitch)
Psi j-t4 - 2.0
o
C/W TEQFP144 (0.4 mm Pitch)
Storage temperature Tstg -55 +150
o
C
*1 These parameters are based on the condition that V
SS
= AV
SS
= DV
SS
= 0.0 V.
*2 Take care that DV
CC
, AV
CC
5 do not exceed V
CC
5 at, for example, the power-on time.
*3 The maximum output current is defined as the value of the peak current flowing through any one of the corresponding pins.
*4 The average output current is defined as the value of the average current flowing through any one of the corresponding pins for
a 10 ms period. The average value is the operation current × the operation ratio.
*5 The total output current is defined as the maximum current value flowing through all of corresponding pins.