Document Number: 002-00833 Rev. *L
Page 3 of 74
S29VS256R
S29VS128R
S29XS256R
S29XS128R
1.
Ordering Information
The ordering part number is formed by a valid combination of the following:
1.1
Valid Combinations
Valid Combination list configurations are planned to be supported in volume for this device. Consult your local sales office to confirm
availability of specific valid combinations and to check on newly released combinations.
Notes:
1. Type 0 is standard. Specify other options as required.
2. BGA package marking omits leading
S29
and packing type designator from ordering part number.
3. Industrial Temperature Range is also available. For device specification differences, please refer to the Specification Supplement with Publication Number
S29VS_XS-R_SP.
S29VS
256
R
xx
BH
W 00
0
Packing Type
0 = Tray (standard; see note (
3 = 13-inch Tape and Reel
Model Number
00 = Top
01 = Bottom
Temperature Range
W = Wireless (–25°C to +85°C)
Package Type and Material
B = Very Thin Fine-Pitch BGA, Low Halogen Lead (Pb)-Free Package
Speed Option (Burst Frequency)
0S = 83 MHz
AA = 104 MHz
AB = 108 MHz
Process Technology
R = 65 nm MirrorBit
®
Technology
Flash Density
256 = 256 Mb
128 = 128 Mb
Device Family
S29VS256R = 1.8 Volt-only Simultaneous Read/Write, Burst-Mode Address and Data
Multiplexed Flash Memory
S29XS256R = 1.8 Volt-only Simultaneous Read/Write, Burst-Mode Address Low,
Address High and Data Multiplexed Flash Memory
S29VS-R Valid Combinations
Model
Numbers
Package Type
Base Ordering
Part Number
Speed Option
Package Type, Material,
and Temperature Range
Packing
Type
S29VS256R
0S, AA, AB
BHW
0, 3
00, 01
6.2 mm x 7.7 mm, 44-ball
S29VS128R
S29XS256R
S29XS128R
