11
Using product
How■to■separate■and■assemble■pressure■packing
1
How to separate pressure packing
Separate it by pulling the packing while you are grabbing outer part of
clean cover and stainless part of it.
(Wash it with kitchen neutral detergent and sponge)
2
How to assemble pressure packing
Insert the packing into groove in clean cover and push the packing by pushing
inner and outer parts of the packing with thumb and rotating clean cover.
-
In case that there is any gap in packing groove when you assemble
packing, steam leakage may occur, which makes it impossible to cook
rice or keep warm (Make sure to check if projection in packing is exactly
matched with that of clean cover before assembling it) Refer to page 10.
3
Check pressure packing assembling statuses
Lay clean cover on clean place and push unplugged packing again with
thumb or index finger while you rotate inner and outer parts of packing.
(Check if shape of packing is circular)
Right■assembling
Wrong■assembling
※ Keep clean cover circular type
※ If clean cover is eclipse, it’s wrong assembled (It’s easier
to be assembled right after clean cover is washed)
Caution■:■When■pressure■packing■/■inner■packing■is■not■
equipped,■it■may■cause■steam■leakage.■
Make sure check if characters are rightly written and projections
in pressure packing and clean cover are exactly positioned.
[Front■side■of■clean■cover]
Characters are written to the opposite direction.
※ Do not put screws or other foreign substances into the hole.
※ Make sure to check front and rear side of clean cover.
[Rear■side■of■clean■cover]
Characters
are exactly
appearing
Right■assembling■method■
WHA_LX0601iDAU_EN.indd 11
2017-12-29 �� 4:22:15