CTC Union FRM220-NMC, User Manual, Page: 93 / 182

Appendix A
91
A.2.20 Provisioning Via Web Based Management
A.2.20.1 Introduction
In an effort to make Networking devices easier to configure, many devices can now be configured via a Web
Page, which should be familiar to all Internet users.
The web page is accessed by the Default IP Address of the device from a Web Browser such as Internet
Explorer or Firefox in the following way:
10.1.1.1/ (Assuming the Default IP Address is 10.1.1.1 )
Before accessing this device by web browser, the IP address must be known or it must be reset or changed to
be used on the desired network. Please refer to Chapter 1, section 1.7 for the factory reset procedure and to
Chapter 2, section 3.2 for Telnet login and section 3.3 for System Configuration settings.
A.2.20.2 Web Main Page
The 1000EAS has two fiber and two copper ports. Because it uses 802.3ah OAM on the fiber links for remote
in-band management, it is able to see up to two (2) remote devices. The 'Remote A' device is connected to this
unit's FIBER 1 port. If another
1000EAS series is connected to FIBER 2 port, then it will show up on this page as
'Remote B'. Each unit is shown with the exact LED status in real time.
The areas that support click on this screen are the graphic images themselves (directly into those units) and
from the Menu item window on the left part of the screen,
1. System – The device's network settings, date & time and the alarm configurations are set here.
2. SNMP – The allowed SNMP managers, community strings and Trap Managers are set here. There is also a 'System
Log' which can be viewed by selecting System Log under the SNMP main menu item.
3. The actual
FRM220-1000EAS units, local, Remote A, and Remote B can be entered for configuration with these
items.