CTC Union FRM220-NMC, User Manual, Page: 73 / 182

Appendix A
71
2. Select item <A> to go to Remote A Status and Configuration .
3. Select <D>, Device Status and Configuration
The screen will look like the following.
4. Select <2>, Advanced Functions
The screen will look like the following.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.240 ***
*********************************************
<< Remote A Status and Configuration >>
Firmware Version [3.240]
Remote NMC Action [Inactive (Stand alone)]
<1> :Fiber 1 Status and Configuration.
<2> :Fiber 2 Status and Configuration.
<3> :UTP 3 Status and Configuration.
<4> :UTP 4 Status and Configuration.
<D> :Device Status and Configuration.
<Q> :Static 802.1Q VLAN Status and Configuration.
<S> :Spanning Tree Status and Configuration.
<L> :Link Loss Forwarding Configuration.
<C> :Counters Status and Configuration.
<U> :Upgrade F/W of Remote device by OAM.
<ESC>:Go to Previous Menu.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.240 ***
*********************************************
<< Remote A Device Status and Configuration >>
<1> :Pause Frame [Disable]
<2> :Advance Functions [Normal ]
<3> :Maximum OAMPDUs Size (60 ~ 1518 Octets) [1500]
<4> :Accept Remote H/W Reset [Disable]
<5> :Upnp [Disable]
<L> :Load Default Settings and Write to System.
<R> :System Reboot.
<ESC>:Go to Previous Menu.
Select Advance Functions.
<0> Normal
<1> Port 1 and Port 2 Trunk Bandwidth 2G
<2> Port 1 to Port 2 Mirror
<3> Port VLAN(1/3; 2/4)
<4> Port 1 and Port 2 Redundancy
<5> Static 802.1Q VLAN
<6> Static 802.1Q VLAN & Port 1/2 Redundancy
<7> 802.1Q VLAN Trunk
<8> Spanning Tree Protocol
<ESC>:Previous Menu.