CTC Union FRM220-NMC, User Manual, Page: 91 / 182

Appendix A
89
A.2.19.6 Configuring the SNMP Agent
The agent for the 1000EAS is embedded. From the Main Menu page, select <M> SNMP Manager . Manager
configuration is required to tell the agent (the SNMP) who has authority to access the SNMP via "Get" commands
(read) or "Set" commands (write) and where to send "trap" messages (unsolicited messages that are usually
generated by alarms in the
1000EAS ).
The manager configuration has the ability to setup access for up to eight (8) different management
workstations. The community strings act like passwords in dealing with the device via SNMP protocol. By assigning
a manager's IP address, a community string, and assigning read/write or read only authority, an administrator can
be granted control access to the
1000EAS .
Note that in the above example, the management workstation with IP address 59.125.162.247 and using the
community string 'secret', has full read and write access. The management station at 59.125.162.242 has read only
privileges when using the community string 'public'.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.240 ***
*********************************************
<< SNMP Manager Configuration Setup >>
Manager's IP Community String Access
=================== ================ ==========
#1 --- --- ---
#2 --- --- ---
#3 --- --- ---
#4 --- --- ---
#5 --- --- ---
#6 --- --- ---
#7 --- --- ---
#8 --- --- ---
<1>~<8>:Edit Manager #1 to #8 Settings.
<D> :Delete All Settings.
<N> :Go to Trap Configuration Menu.
<ESC> :Go to Previous Menu.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.240 ***
*********************************************
<< SNMP Manager Configuration Setup >>
Manager's IP Community String Access
=================== ================ ==========
#1 59.125.162.247 secret read-write
#2 59.125.162.242 public read-only
#3 --- --- ---
#4 --- --- ---
#5 --- --- ---
#6 --- --- ---
#7 --- --- ---
#8 --- --- ---
<1>~<8>:Edit Manager #1 to #8 Settings.
<D> :Delete All Settings.
<N> :Go to Trap Configuration Menu.
<ESC> :Go to Previous Menu.