CTC Union FRM220-NMC, User Manual, Page: 85 / 182

Appendix A
83
From the Device Status and Configuration page, the egress scheduling can be configured either as a
weighted classification or as strict classification.
Next, for each of the 1000EAS ports (two fiber and two UTP) the CoS priority is assigned.
So, for example, if the fiber port's CoS is set to '7' and CoS priority 7 is mapped to the internal switch's queue 3, then packets
destined to egress this fiber port will have the highest priority.
To disable the CoS feature for this port, select <7> :Use IEEE Tag's CoS [Yes] and toggle the the value to 'No'.
Set Egress Scheduling Mode.
<1> Weighted <2> Strict
<ESC>:Previous Menu.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.273 ***
*********************************************
<< Local Fiber 1 Status and Configuration >>
Link Status [Link Up ]
Remote Device Power [OK]
OAM Remote Loopback Test [OFF]
OAM Looped [OFF]
<1> :Port Active [Enable ]
<2> :Auto Laser Shutdown [Disable]
<3> :OAM Channel A Mode [Active ]
<4> :Remote Loopback Test [Disable]
<5> :Ingress Rate Limit [Unlimited]
<6> :Egress Rate Limit [Unlimited]
_______________________________________________________________________
Set Default Port's Class of Service(CoS).
<0> 0 <1> 1 <2> 2 <3> 3
<4> 4 <5> 5 <6> 6 <7> 7
<ESC>:Previous Menu.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.273 ***
*********************************************
<< Local Fiber 1 Status and Configuration >>
Link Status [Link Up ]
Remote Device Power [OK]
OAM Remote Loopback Test [OFF]
OAM Looped [OFF]
<1> :Port Active [Enable ]
<2> :Auto Laser Shutdown [Disable]
<3> :OAM Channel A Mode [Active ]
<4> :Remote Loopback Test [Disable]
<5> :Ingress Rate Limit [Unlimited]
<6> :Egress Rate Limit [Unlimited]
<7> :Use IEEE Tag's CoS [No ]
<8> :Default Port CoS [7]
<S> :SFP and D/D Function [Yes]
<ESC>:Go to Previous Menu.