CTC Union FRM220-NMC, User Manual, Page: 101 / 182

Appendix A
99
Step 2. Setup the VID for 1, 10, and 20 for the fiber and two UTP ports. Then, from the 'Operate' pull-down, select
'Create' and one by one setup the VID1, VID10 and VID20 static VLANs.
Step 3. For each created VID click 'Apply Parameters'. When finished, the screen will look like the following.
Some Tagging definitions:
Tagged : This means that packets that egress the assigned port will have the packets tagged with the VID assigned to that port.
Untagged : This means that any packets that egress the assigned port will have all tag information removed.
Non-member : When a port is not a member of a VID, packets tagged with that VID will not be allowed to egress that port. (i.e.
they will be dropped)