CTC Union FRM220-NMC, User Manual, Page: 145 / 182

Appendix A
143
A.7.21 UTP Port Provisioning
Select item 'L' from the main menu.
From the Local Status and Configuration menu, each UTP port can be managed (activated or disabled,
speed & duplex set, ingress & egress bandwidth rates set, and diagnostic loop back performed) individually per
port. Select port number. Select items by number/letters.
Select the first UTP port by keying "2 or 3" (depending on model) at the console.
*************************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-10/100A ver:3.016 ***
*************************************************
<< Local Status and Configuration >>
NMC Action [Active]
<1> :Fiber 1 Status and Configuration.
<2> :UTP 2 Status and Configuration.
<3> :UTP 3 Status and Configuration.
<D> :Device Status and Configuration.
<Q> :Static 802.1Q VLAN Status and Configuration.
<S> :Spanning Tree Status and Configuration.
<L> :Link Loss Forwarding Configuration.
<C> :Counters Status and Configuration.
<ESC>:Go to Previous Menu.
*************************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-10/100A ver:3.016 ***
*************************************************
Fiber 1 [Link Up ] [Remote LB: Off ]
UTP 2 [Link Down ] [Speed: -----] [Duplex: ----]
UTP 3 [Link Up ] [Speed: 100 M] [Duplex: Full]
Remote A Module [FRM220-10/100A ]
Port 1 OAM Mode [Active ]
Advance Functions [Normal ]
<L> :Local Status and Configuration.
<A> :Remote Status and Configuration.
<M> :SNMP Manager.
<S> :System Configuration.
<ESC>:Logout.