CTC Union FRM220-NMC, User Manual, Page: 137 / 182

Appendix A
135
DO NOT CLOSE THE WINDOW OR ALLOW ANY POWER INTERRUPTION!!!! THIS IS
VERY IMPORTANT.
The flash writing takes at least 50 seconds. The progress bar gives an approximation of the percent completed. When complete,
the "Rebooting …" message will be displayed.
DO NOTHING!!
Step 10. After update, the
FRM220-10/100AS-2 will automatically reboot. The current Telnet session will close. (During
reboot, all LEDs will first go out, then all LEDs will light. The "Test" LED will extinguish first and a few seconds later the
LEDs will return to normal running and link states.)
Check that the TFTP transfer was normal with the 'OK' status.
Received 2984684 bytes
DO NOT power off or close the windows until write complete.
Please wait for up to 2 minutes while writing flash.
0% 100%
|-------------------------------------------|
############################################
Rebooting ...