CTC Union FRM220-NMC, User Manual, Page: 56 / 182

Appendix A
54
You will be prompted for a final Yes or No.
Step 9. Press the 'Y' key to start TFTP transfer and update. The message like "Write bootpImage to memory" will be displayed.
The file transfer takes about 20 seconds.
After the file transfer, approximately 50 seconds will be required for the flash to be written, followed by the unit automatically
performing a "warm boot". Do not close the Telnet session or allow any power interruption during the upgrade process.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.000 ***
*********************************************
<< System Configuration >>
Version [1.200-3.000-0.000-0.000]
MAC Address [00:02:AB:FF:FE:02]
NMC Action [Inactive (Stand alone)]
<1> :IP Address [10.1.1.1]
<2> :Subnet Netmask [255.0.0.0]
<3> :Default Gateway IP [10.1.1.254]
<4> :Host Name [1000eas]
<5> :TFTP Server IP [10.1.1.100]
<6> :TFTP File Name [bootpImage]
<7> :Do TFTP and Update Firmware.
<A> :Alarm Settings.
<T> :Date and Time.
<L> :Password Setting.
<R> :System Rebooting.
==================================
Download F/W (Y/N)
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.000 ***
*********************************************
<< System Configuration >>
Version [1.200-3.000-0.000-0.000]
MAC Address [00:02:AB:FF:FE:02]
NMC Action [Inactive (Stand alone)]
<1> :IP Address [10.1.1.1]
<2> :Subnet Netmask [255.0.0.0]
<3> :Default Gateway IP [10.1.1.254]
<4> :Host Name [1000eas]
<5> :TFTP Server IP [10.1.1.100]
<6> :TFTP File Name [bootpImage]
<7> :Do TFTP and Update Firmware.
<A> :Alarm Settings.
<T> :Date and Time.
<L> :Password Setting.
<R> :System Rebooting.
==================================
Download F/W (Y/N)
Write bootpImage to memory. Please wait.