CTC Union FRM220-NMC, User Manual, Page: 62 / 182

Appendix A
60
A.2.11 Fiber Port Provisioning
Select item 'L' from the main menu.
From the Local Status and Configuration menu, each port can be managed (activated or disabled, speed &
duplex set, ingress & egress bandwidth rates set, and diagnostic loop back performed) and monitored (link status,
RMON counters, DD functions, dying gasp) individually per port. Select port number. Select items by
number/letters.
Select the first fiber port by keying "1" at the console.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.240 ***
*********************************************
<< Local Status and Configuration >>
NMC Action [Inactive (Stand alone)]
<1> :Fiber 1 Status and Configuration.
<2> :Fiber 2 Status and Configuration.
<3> :UTP 3 Status and Configuration.
<4> :UTP 4 Status and Configuration.
<D> :Device Status and Configuration.
<Q> :Static 802.1Q VLAN Status and Configuration.
<S> :Spanning Tree Status and Configuration.
<L> :Link Loss Forwarding Configuration.
<C> :Counters Status and Configuration.
<ESC>:Go to Previous Menu.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.240 ***
*********************************************
Fiber 1 [Link Up ] [Remote LB: Off ]
Fiber 2 [Link Up ] [Remote LB: Off ]
UTP 3 [Link Up ] [Speed: 100M] [Duplex: Full]
UTP 4 [Link Down ] [Speed: -----] [Duplex: ----]
Remote A Module [1000EAS ]
Remote B Module [1000EAS ]
Port 1 OAM Mode [Active ]
Port 2 OAM Mode [Active ]
Advance Functions [Normal ]
<L> :Local Status and Configuration.
<A> :Remote A Status and Configuration.
<B> :Remote B Status and Configuration.
<M> :SNMP Manager.
<S> :System Configuration.