CTC Union FRM220-NMC, User Manual, Page: 66 / 182

Appendix A
64
A.2.14.1 UTP Port 3 Provisioning
<1>
Port Active : When disabled, this port will no longer transfer any data and the link will be down.
<2> Negotiation : The UTP ports of this converter follow IEEE802.3u standards for n-way auto-negotiation. The port can also
be manually configured, over-riding the auto-negotiation in "forced" mode. These port settings are explained in more detail
under the section 3.3.9.2
<5> & <6>
Ingress/Egress Rate Limit : These bandwidth control settings are explained in more detail under the section
3.3.9.3.
<7>
Default Port CoS : The Class of Service is a 3 bit field within an Ethernet frame header when using 802.1Q tagging. The
field specifies a priority value of between 0 and 7 inclusive that can be used by Quality of Service (QoS) disciplines to
differentiate traffic. When 802.1Q is not enabled, there is no tag and therefore no 802.1p tag priority. Use this setting to set the
default CoS for this port (0 to 7).
<S>
Confirm and Save Settings : Any settings made in this menu are not saved or become active until this save procedure is
completed.
A.2.14.2 UTP Port 3 Negotiation
By changing the negotiation setting from 'Auto' to 'Manual', the additional menu items 3 & 4 are revealed.
<3>
Speed : The UTP ports support 10, 100, or 1000 forced configuration speed.
<4> Duplex : The UTP ports support Full or Half-Duplex operation modes. Gigabit Ethernet cannot be set to Half-Duplex as it
is not standard.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.273 ***
*********************************************
<< Local UTP 3 Status and Configuration >>
Link Status [Link Up ]
Speed [100M]
Duplex [Full]
<1> :Port Active [Enable ]
<2> :Negotiation [Auto]
<5> :Ingress Rate Limit [Unlimited]
<6> :Egress Rate Limit [Unlimited]
<7> :Default Port CoS [0]
<S> :Confirm and Save Settings(Port Active, Speed, Duplex and Nego
<ESC>:Go to Previous Menu.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-1000EAS Ver:3.273 ***
*********************************************
<< Local UTP 3 Status and Configuration >>
Link Status [Link Up ]
Speed [1000M]
Duplex [Full]
<1> :Port Active [Enable ]
<2> :Negotiation [Manual]
<3> :Speed [1000M]
<4> :Duplex [Full]
<5> :Ingress Rate Limit [Unlimited]
<6> :Egress Rate Limit [Unlimited]
<7> :Use IEEE Tag's CoS [Yes]
<8> :Default Port CoS [0]
<S> :Confirm and Save Settings(Port Active, Speed, Duplex and
Negotiation).
<ESC>:Go to Previous Menu.