Covidien Nellcor OxiMax N-600x, Operator'S Manual

Page: 88 / 146

Managing Oximetry Data
82
Operator’s Manual
3. Firmware Version —The next data field displays the firmware level (Version 2.0.4.0) and a
firmware verification number (CRC: XXXX). Neither of these numbers should change
during normal operation.
Figure 76. Location of Firmware Version in Column Headings
Note:
The numbers may change if the oximeter is serviced and receives a firmware upgrade.
4. Alarm Limits —The last data field in the top line indicates the upper and the lower alarm
limits for SpO
2
and for the pulse rate (PR limit). In the example, the lower alarm limit for
SpO
2
is 85% and the upper alarm limit is 100%. Pulse Rate alarm limits are 40 and 170
BPM. The SatSeconds alarm limit (100SAT-S) displays the SatSeconds alarm setting. In this
example, SatSeconds is set to 100.
Figure 77. Location of Alarm Limits in Column Headings
5. Monitor Mode —The first field of the second line identifies the monitor (ADULT or
NEONATE) mode.
Figure 78. Location of Monitor Mode in Column Headings
6. Response Mode —The second field of the second line identifies the SatSeconds alarm
limit and SpO
2
response (NORMAL or FAST) mode. The response mode may impact the
SPD alarm behavior.
Figure 79. Location of SpO
2
and Response Mode in Column Headings
7. Data Column Headings —Actual column headings are in the last row of the column
heading line.
Figure 80. Location of Data Column Headings