Covidien Nellcor OxiMax N-600x, Operator'S Manual

Page: 73 / 146

Managing OxiMax™ Pulse Oximetry Sensor Data
Operator’s Manual
67
3. Press the DELETE softkey or press NO and then EXIT to close this function without
deleting the trend data.
Note:
All the trend data clears after pressing the DELETE softkey and the oximeter sounds
three beeps
.
4. Press the YES softkey.
Managing OxiMax™ Pulse Oximetry Sensor Data
Understanding Sensor Messages
OxiMax pulse oximetry sensor messages display when the oximeter identifies a new
sensor, or when the oximeter is unable to display saturation data.
Sensor Type Message
When an OxiMax pulse oximetry sensor is connected to the oximeter, a “SENSOR
TYPE:...” message displays for four to six seconds at the bottom of the screen. The
message identifies the type (model) of OxiMax pulse oximetry sensor connected to
the oximeter.
Figure 55. Sensor Type Message Screen
In-Sensor Data Type Message
When an OxiMax pulse oximetry sensor with no previously recorded patient data is
connected to the oximeter, a “DATA TYPE: . . .” message displays briefly at the bottom
of the oximeter screen after the sensor type message. The message identifies the
oximeter's current data type setting that will be used to write data to the OxiMax
pulse oximetry sensor. The data type setting options are EVENT/SpO
2
and EVENT/
SpO
2
+BPM.
Figure 56. In-Sensor Data Type Message Screen