Covidien INVOS 5100C, Operator'S Manual

Page: 131 / 178

Operating in the Database Operational Mode
Operator's Manual 8-13
When finished, press the HOME key to exit the Baseline menu and return to the Main screen.
Set Individual Channels to Current rSO
2
Baseline in Four-Channel Monitoring
To set an individual channel baseline, press the HOME key to display the Main screen, then
perform the following navigation bar options:
Select the channel or channels to set the baseline at the current rSO
2
value. This will display an
event mark line and code on the screen in the graph area for the individual channel only.
When finished, press the HOME key to exit the Baseline menu and return to the Main screen.
Auto Baseline Set
If a baseline is not set for all channels within 5 minutes of first rSO
2
data displayed, the system will
automatically identify baselines and notify the user with an audio tone and the visual message
“AUTO BASELINE SET” displayed in yellow on the upper right corner of the screen. The alarm noti-
fication will last for 5–10 seconds. The Database summary screen will display with the “AUTO BASE
LINE SET—PLEASE ACCEPT OR SET NEW BASELINES” message in yellow (see
Figure 8-6. ). Perform
the following navigation bar options:
Select ACCEPT AUTO BASELINES if the automatic baseline time is appropriate for the procedure
or select SET CURRENT VALUES to select current rSO
2
value or values as the baseline or base-
lines.
On the Main screen, the auto set baselines will be displayed in the graph area of each channel,
and status code 21 (AUTO BASELINE SET) will appear in the tabular data and case history outputs.
8.5.2
Patient Identifier in Database Operational Mode
The Patient identifier allows for storing in memory the unique individual patient number. The
identifier allows the operator to locate the stored files. The Patient identifier can be entered at dif-
ferent times during the case when operating in Database operational mode (see
Figure 5-3. and
sections Entering Patient Identifier after Start Screen , Entering or Editing Patient Identifier through
Main Screen , and Entering or Editing Patient Identifier through Database Summary ).
BA EVENTS DATABASE SUMMARY ALARM AUDIO ON/OFF NEXT MENU
SET BASELINES SET CHANNEL EVENT MARK PREVIOUS MENU
CHANNEL 1 SET CHANNEL 2 SET CHANNEL 3 SET CHANNEL 4 SET
ACCEPT AUDO BL SET CURRENT VALUES PREVIOUS MENU